Plate carrier Vulcan III

Zentauron

New

  • ALL-ROUND TALENT - increased comfort combined with freedom of movement for tactical equipment I The tactical vest for professionals - Whether professional in the military police use for airsoft & paintball.
  • MOLLE CLAP on front & back make the tactical vest flexible I incl. MOLLE-Lasercut Flap - For individual extensions like attaching magazine or multi-purpose pouches
  • EXTREMELY FLAT - Design as a minimal plate carrier allows the Sk4 vest to be worn under outerwear I Ballistic vest e.g. for vehicle crews or covert investigations
  • ZENTUBES on shoulder straps & cummerbund - ROC buckles facilitate fast donning & doffing I With quick release system - for easy access to the patient in emergency situations
  • MADE IN GERMANY - Bundeswehr vest made of Cordura® polyamide 6.6 I Cummerbund made of rubber with 3 or 4 steps I Accessories like modular or magazine flaps can be found in our online store

More details

In stock - delivery time: 3-5 workdays*

296,00 € Tax included

0.85 kg
Delivery time: 3-5 days (12-17 days if not in stock) *

Add to wishlist

Features

MaterialCordura® polyamide 6.6
WebbingPolyamide 6.6
Closure typeQuick release
Country of originDE

More info

Plate carrier with quick release system

Vulcan III is the latest generation of the ZENTAURON plate carrier. We have completely revised the classic Vulcan and raised it to a new level. The Vulcan III is fully equipped with ZenTubes (ROC buckles) on shoulder straps and cummerbund, making it extremely quick to put on and take off. The ZenTubes also function as a quick release system for emergencies. The quick release system is not only advantageous for the wearer, it also offers the Medic easy access to the patient in emergency situations.

The plate pockets for hard and soft ballistics are separated from each other. The ballistics supplied for business purposes fit into the plate inserts.
The soft ballistic compartment is padded with 3D MESH on the side facing the body. The wearing comfort can also be extended with additional cushions (Hivent).
MOLLE loops on the front, back and cummerbund make the Vulcan III fully flexible: various magazine pockets and multi-purpose pockets can be attached as required.

The front plate pocket

On the outside of the Vulcan III plate pocket there are 4x3 MOLLE loops, which are provided with velcro. IR and ID patches can be applied as well as cables from radios.
Underneath there are further MOLLE loops for attaching magazine and multi-purpose bags. On the outside, a vertical strap for attaching cables and other objects is attached on the left and right.

The fasteners for the ZenTubes quick release system (ROC buckles) are secured with bolts for extra stability. The inside side is upholstered with 3D mesh fabric and contributes to a good wearing comfort and good ventilation. The inserts of the panel pockets are opened and closed with Velcro.

Inside is the compartment for soft ballistics or non-ballistics, which is simply inserted and the compartment closed with Velcro. On the outside is the hardball compartment where the SK4 plate is placed. For fixing the SK4 plate a 50 mm belt is sewn on, which secures the plate reliably. The Velcro of the SK4 plate pocket can also be used to attach the abdominal protection and the front pocket.

With the optional V3 MOLLE Flap and V3 Magazine Flap, the setting can be quickly adapted to any application. The MOLLE flaps are attached to the plate carrier via loops with Velcro. Another variant is the fastening with QRASM buckles or G-Hooks, so that the flaps can be used as quick-change flaps.

The back plate pocket

On the outside there are again 4x3 MOLLE loops, which are fitted with Velcro and vertical straps on the outside.
To improve wearing comfort, the plate bag is equipped with additional padding on the shoulder straps.

On the lower half of the plate pocket is the system for the cummerbund.
The cummerbund is attached to horizontal MOLLE belts and fixed with rubber cords. The size is adjusted via the webbing loops on the cummerbund and the straps of the plate pocket. For example, 2x12cm adjustment range is available for size adjustment. The horizontal MOLLE loops can of course also be used to mount other equipment.

The holder for the hard and soft ballistics is identical to the front plate pocket.
The rear plate pocket also has a Velcro fastener for the ZENTAURON weight transfer. This allows the Vulcan III plate carrier to be attached to the warbelt and the MOBAST system supplied at work, as well as to several other belts - such as those from LHT, for example.

How are ROCs used?

The quick release system with ZenTubes is based on ROC buckles, which are simple and intuitive to use. This new locking system automatically equips the Vulcan III plate carrier as a quick release system. The ZenTubes are equipped with a rubberized cord for better grip. The mechanism is triggered by pulling the cord away from the body and upwards.

The Cummerbund

The cummerbund is equipped with 6x3 MOLLE loops on the outside and thus offers space for IFAK, fog pot and multi-purpose bags. Inside the cummerbund there is room for ballistic soft inserts or equipment such as the Sigpi (signal pistol of the German Armed Forces) and radios.

The shoulder strap

The shoulder straps are equipped on the front with the ZenTubes quick release fastener and are attached to the rear plate pocket by the plastic connectors. The length of the straps can be infinitely adjusted via the Velcro surface. The wearing comfort can be easily extended with the optimal universal shoulder pads and shoulder pads. Other accessories such as upper arm and neck protection can also be attached via the shoulder straps. 

Attachment of abdominal protection and front pocket to Vulcan III

The attachment of abdominal protection and front pocket for plate carriers is done via the Velcro surfaces of the front plate pocket. To do this, the Velcro surfaces are connected and then closed together with the plate pocket. This keeps the space between torso and abdomen as small as possible.

Note on size

  • Abdominal girth Size Standard: waistband adjustable from 132 cm - 105 cm
  • Abdominal girth Size short: waistband adjustable from 118 cm - 90 cm

Data without ballistic inserts. The use of soft ballistics and hardballistics reduces the usable circumference by up to 10 cm.

Scope of delivery

  • 1x Plate carrier Vulcan III

Reviews

Grade 
Matias A 2023-05-02

Way too big

The plate carrier "Standard" version is XXXL size . Even though you can adjust it the standard version with from 132 cm - 105 cm, it is only good for a very large for person even if its adjusted only to 105cm.
The standard and short are very misleading in terms.
Measure your chest and waist before ordering..
Otherwise the quality seems really good after one year of using.

  • 3 out of 3 people found this review useful.
Grade 
Bjarne V 2023-03-20

Festgeklebte Plastikkappen

Guter Plattenträger Qualität und Verarbeitung super, jedoch gibt es noch Verbesserungsmöglichkeiten.

Die Bänder zum öffnen des Schnellverschlusssystems sind bei meinem nur festgeklebte Plastikkappen an einem dünnen Band (wie auf dem Bildern Finnisch M05 CAMO). Diese reißen sehr leicht ab, hab jetzt schon 3 abgerissen. Ohne Plastikkappe lässt sich das Schnellverschlusssystem nur sehr schwer öffnen.
Meiner ist Steingrau und hat leider trotzdem diese Plastikkappen ohne knoten.

  • 3 out of 3 people found this review useful.
Grade 
Marvin R 2022-11-24

10/10 Beste

Top

  • 0 out of 3 people found this review useful.
Grade 
U.Z. 2022-04-20

Ausgezeichnete Qualität

Erfüllt alle Anforderungen für den Einsatz. "Notöffnung" und dann wieder Schnellverschluss geht einfach, trotzdem hält Verschluss bombenfest bei Last. Einschübe für Ballistikschutzeinlagen optimal getrennt für Weich- und Hartballistik. Absolut ausreichende Befestigungsmöglichkeiten. Mit optionalen Schulterpolstern sehr angenehm zu tragen. Achtung unbedingt vor Order Bauchumfang mit Bekleidung messen, um richtige Kummerbundgröße zu ordern. Bestellvorgang und tel. Beratung sehr gut.

  • 2 out of 2 people found this review useful.

Write a review

Plate carrier Vulcan III

Plate carrier Vulcan III

  • ALL-ROUND TALENT - increased comfort combined with freedom of movement for tactical equipment I The tactical vest for professionals - Whether professional in the military police use for airsoft & paintball.
  • MOLLE CLAP on front & back make the tactical vest flexible I incl. MOLLE-Lasercut Flap - For individual extensions like attaching magazine or multi-purpose pouches
  • EXTREMELY FLAT - Design as a minimal plate carrier allows the Sk4 vest to be worn under outerwear I Ballistic vest e.g. for vehicle crews or covert investigations
  • ZENTUBES on shoulder straps & cummerbund - ROC buckles facilitate fast donning & doffing I With quick release system - for easy access to the patient in emergency situations
  • MADE IN GERMANY - Bundeswehr vest made of Cordura® polyamide 6.6 I Cummerbund made of rubber with 3 or 4 steps I Accessories like modular or magazine flaps can be found in our online store

These products may also interest you

Download

Zentauron care instructions

Care instructions for Zentauron products

Download (42.16k)